The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
IC, DRIVER, PERIPHERAL, DUAL, 36V
Motor Type: Half-H
No. of Outputs: 4
Output Current: 1.2A
Output Voltage: 39V
Driver Case Style: DIP
No. of Pins: 16
Supply Voltage Min: 4.5V
Supply Voltage Max: 36V
Operating Temperature Min: 0°C
Operating Temperature Max: 70°C
Packaging: Each
Base Number: 293
Device Type: Motor
MSL: -
Operating Temperature Range: 0°C to +70°C
SVHC: No SVHC (16-Dec-2013)
Termination Type: Through Hole
Active Quadruple Half-H Driver in a 16 Pin PDIP Package
The L293DNE is a quadruple high current half-H driver. The L293DNE is designed to provide bidirectional drive currents of up to 600mA at voltages from 4.5V to 36V. The device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high current/high voltage loads in positive supply applications. All inputs are TTL compatible. Each output is a complete totem pole drive circuit, with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in the high impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
Separate Input logic Supply
Internal ESD Protection
Thermal Shutdown
High noise immunity inputs
Output current 600mA per channel
Output clamp diodes for inductive transient suppression
Industrial
Motor Drive & Control
Power Management