The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
Product Details
The bq Witbox is a domestic printer with DIN-A4 print volume (21 x 29.7cm) and a height of up to 20 cm, meaning it has a greater capacity to print large-scale objects and multiple parts simultaneously than any other printer.
Several factors affect the quality of 3D printing. One of them is the height of each layer: the lower the height, the better the level of detail and resolution of the printed object. It's also very important for the printing base to be as level as possible. A toughened, laminated* glass base is incorporated in Witbox.
- Special Single Extruder
- SD-Controller with LCD Display
- Special 3-Point-Printbed (200mm x 200mm)
- Layerhight, adjustable: from 0,1mm up to 0,3mm
- Teflon-coated Fibonacci Filament Guiding System
- Rigid Metall-Housing with chrome coating
- Special printspace-door for safety
- CE safety certified
- The bq Witbox has been painstakingly designed to optimise its functionality. It’s a fully enclosed printer with a locking front door system, preventing accidental access during printing and making it a particularly safe to use around children.
Note
You can run Witbox printer with a variety of open source software such as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of use, greater compatibility and total technological independence.
* For optimum printing, lacquer must be sprayed on the base before you start printing
Basic technical competency is recommended for set up, use and on going maintenace of this 3D printer throughout it's lifetime
Supplied with
- Witbox 3D printer
- Print base
- Set of two keys
- Two side panels and one top panel
- USB cable
- Power cable
- Spool of PLA filament (1.75 mm)
- Metal spool-holder
- 4GB SD card (pre-loaded with sample 3D models)
- Sample printed object
- Four feet/underside supports
- Maintenance kit, comprising:
- One replacement Hot-End
- Two cleaning needles
- Three Allen keys (1.5, 2.5 and 4 mm)