SPARKFUN

    Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about every job. With everything included in this kit, you’ll be able to sense gesture, humidity, tem...

ID number: 1569/15
Stock YES , 1 pcs.
Brand: SPARKFUN
194,64 €

  Description: This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor. With this shield you will be able to use the area provided to solder on whatever custom circuitry you can come up with. This shield provides 8 ...

ID number: 918/54
Stock YES , 3 pcs.
Brand: SPARKFUN
3,82 €

      This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on alcohol...

ID number: 501/54
Stock NO
Brand: SPARKFUN
6,39 €

    Product details   This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. The Arduino Pro series is...

ID number: 1424/
Stock YES , 2 pcs.
Brand: SPARKFUN
12,86 €

  Product details   This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will ...

ID number: 1423/
Stock YES , 5 pcs.
Brand: SPARKFUN
12,86 €

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.   ...

ID number: 587/58
Stock NO
Brand: SPARKFUN
7,69 €

    Product details   This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. These little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purp...

ID number: 1477/24
Stock YES , 7 pcs.
Brand: SPARKFUN
10,26 €

    The BlueSMiRF Silver is the latest Bluetooth wireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF...

ID number: 491/58
Stock NO
Brand: SPARKFUN
36,10 €

  Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing....

ID number: 515/58
Stock NO
Brand: SPARKFUN
5,11 €

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.   Features: - Pin Style: Square - Number of Pins: 40 - Pin Spacing: 0.1" (2.54 mm) - Pin Length: 11.5 mm    ...

ID number: 636/58
Stock YES , 17 pcs.
Brand: SPARKFUN
1,94 €

  Description: This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it bread...

ID number: 974/
Stock NO
Brand: SPARKFUN
3,82 €

  Product Details   This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the butto...

ID number: 1222/
Stock NO
Brand: SPARKFUN
6,39 €

  Product details   This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can cr...

ID number: 1216/17
Stock NO
Brand: SPARKFUN
6,16 €

    This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrod...

ID number: 516/54
Stock YES , 5 pcs.
Brand: SPARKFUN
12,43 €

Description: This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.   This sensor has a high sensitivity and fast response ti...

ID number: 346/54
Stock NO
Brand: SPARKFUN
9,37 €

Product details This coin acceptor will take up to 6 different kinds of coin! Whether you’re building your own arcade cabinet or just charging admission to your house, this programmable coin acceptor makes it easy to monetize your next project....

ID number: 1285/
Stock NO
Brand: SPARKFUN
58,06 €

The VL53L1X is the latest Time Of Flight (ToF) sensor to be released. It uses a VCSEL (vertical cavity surface emitting laser) to emit a class 1 IR laser and time the reflection to the target. (You can’t see the laser but cell phones can) What ...

ID number: 1913/54
Stock YES , 1 pcs.
Brand: SPARKFUN
48,19 €

These are our large, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it"s aluminum, it"s easy to cut and drill so t...

ID number: 1996/24
Stock YES , 1 pcs.
Brand: SPARKFUN
6,39 €

Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of basic sensors for any beginner or experienced programmer. With everything included in this kit, you’ll be able to sense acceleration, force,...

ID number: 409/15
Stock YES , 4 pcs.
Brand: SPARKFUN
59,95 €

  Description: Small breakout board for the PIC Microchip ENC28J60. Contains all the necessary hardware to implement an Ethernet interface including the isolation transformer and LINK/STATUS LEDs. SPI interface makes this one of the easiest 10Ba...

ID number: 1001/
Stock NO
Brand: SPARKFUN
47,03 €

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power G...

ID number: 1804/54
Stock NO
Brand: SPARKFUN
13,10 €

Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love th...

ID number: 675/54
Stock YES , 1 pcs.
Brand: SPARKFUN
23,52 €

  Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.   These sensors are simple to set up and gr...

ID number: 656/54
Stock YES , 2 pcs.
Brand: SPARKFUN
14,53 €

Simple breakout board for the MQ - 3, MQ - 4 and MQ - 6 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.   Note: This is the PCB only. Sensors listed below.   Dimensions: 16.8mm diameter   Documents: -...

ID number: 348/58
Stock NO
Brand: SPARKFUN
1,23 €

  Product Details   The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monito...

ID number: 1275/
Stock YES , 1 pcs.
Brand: SPARKFUN
67,82 €

  Product details   Copernicus II is the latest iteration of the popular Copernicus GPS module from Trimble. The Trimble Copernicus II delivers proven performance and Trimble quality for a new generation of position-enabled products. It fea...

ID number: 1282/
Stock NO
Brand: SPARKFUN
63,82 €

Product Details   Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applications. It offers very low power consumption, high sensitivity, and best in class signal acquisition and ...

ID number: 1281/
Stock NO
Brand: SPARKFUN
51,18 €

    Product Details   The EM-506 GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status in...

ID number: 1276/
Stock YES , 1 pcs.
Brand: SPARKFUN
53,73 €

  Product Details   The GP-20U7 is a compact GPS receiver with a built-in high performances all-in-one GPS chipset. The GP-20U7 accurately provides position, velocity, and time readings as well possessing high sensitivity and tracking capab...

ID number: 1278/
Stock YES , 1 pcs.
Brand: SPARKFUN
25,57 €

  Product Details   The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim desig...

ID number: 1277/
Stock NO
Brand: SPARKFUN
59,35 €

  Product Details   The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. Th...

ID number: 1279/
Stock NO
Brand: SPARKFUN
90,35 €

This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!   Utilizes the extremely common KS0108B parallel ...

ID number: 349/38
Stock NO
Brand: SPARKFUN
30,94 €

  Description: This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, H...

ID number: 1022/
Stock NO
Brand: SPARKFUN
423,14 €

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.    ...

ID number: 637/58
Stock YES , 2 pcs.
Brand: SPARKFUN
1,27 €

The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative humidity and temperatu...

ID number: 416/54
Stock NO
Brand: SPARKFUN
12,86 €

This is a breakout board for Honeywell’s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and,...

ID number: 351/54
Stock YES , 13 pcs.
Brand: SPARKFUN
24,47 €

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm.   This sensor has a high sensitivity and fast response time. The se...

ID number: 352/54
Stock YES , 1 pcs.
Brand: SPARKFUN
10,26 €

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, whit...

ID number: 572/3
Stock NO
Brand: SPARKFUN
6,39 €

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, ce...

ID number: 1997/24
Stock YES , 1 pcs.
Brand: SPARKFUN
6,39 €

    Product details   We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs (5 of each) all conveniently packaged in a nice reusab...

ID number: 1251/17
Stock NO
Brand: SPARKFUN
4,27 €

  Product details   This is a mixed pack of 26 LEDs all conveniently packaged in a nice reusable ESD safe bag. They include the most used colors so you will always have what you need on hand. Make that next project shine!     Incl...

ID number: 1253/17
Stock NO
Brand: SPARKFUN
13,70 €

    Product details   The LED Rainbow Pack contains two diffused 5mm PTH LEDs of each color of the rainbow, red, orange, yellow, green, blue, and purple. This is a great way to sample each one and decide what you really need or just to...

ID number: 1252/17
Stock YES , 5 pcs.
Brand: SPARKFUN
4,51 €

  Description: This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project.   Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are ir...

ID number: 999/
Stock NO
Brand: SPARKFUN
1,94 €

  Product details     Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! ton closes whe...

ID number: 1429/17
Stock YES , 8 pcs.
Brand: SPARKFUN
2,51 €

  Product details   It’s a simple board which holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.   Documents:   - Schematic - Eag...

ID number: 1476/
Stock YES , 4 pcs.
Brand: SPARKFUN
5,31 €

    Product details   A simple, very bright pink LED LilyPad. Light up the night!   LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively...

ID number: 1428/17
Stock YES , 10 pcs.
Brand: SPARKFUN
5,31 €

    The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcon...

ID number: 1593/
Stock NO
Brand: SPARKFUN
6,78 €

    Product details   The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it ...

ID number: 1427/17
Stock YES , 4 pcs.
Brand: SPARKFUN
6,78 €

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V ...

ID number: 356/54
Stock YES , 1 pcs.
Brand: SPARKFUN
3,82 €

  Description: The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection of 2.6V. How...

ID number: 849/42
Stock NO
Brand: SPARKFUN
20,61 €

This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video belo...

ID number: 417/54
Stock YES , 12 pcs.
Brand: SPARKFUN
5,78 €

This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.   This sensor has a h...

ID number: 559/54
Stock YES , 3 pcs.
Brand: SPARKFUN
6,39 €

You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey.   Using the MaKey MaKey ...

ID number: 1803/
Brand: SPARKFUN
60,94 €
ID number: 2155/
Stock NO
Brand: SPARKFUN

    This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm. &n...

ID number: 502/54
Stock YES , 3 pcs.
Brand: SPARKFUN
6,39 €

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmotor sports a 3mm D-shaft.   Note...

ID number: 657/
Stock YES , 4 pcs.
Brand: SPARKFUN
16,73 €

Description: These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advantage of the 0.77” hole pattern. These enclosures have a length of 1.14”, a width...

ID number: 690/
Stock YES , 6 pcs.
Brand: SPARKFUN
1,94 €

This is the MiniGen Signal Generator, a small shield for the Arduino Pro Mini that is capable of generating sine, square, or triangle waves at up to 3MHz, and approximately 1Vp-p. Though the MiniGen is technically a shield it can, in fact, operate as...

ID number: 359/58
Stock NO
Brand: SPARKFUN
40,63 €

It"s your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including le...

ID number: 1998/9
Stock YES , 28 pcs.
Brand: SPARKFUN
1,23 €

    It’s your basic red action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length...

ID number: 1592/9
Stock YES , 39 pcs.
Brand: SPARKFUN
1,23 €

  Product details   It’s your basic white action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functio...

ID number: 1218/9
Stock YES , 34 pcs.
Brand: SPARKFUN
1,23 €

  Product details   It’s your basic yellow action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functi...

ID number: 1219/9
Stock YES , 43 pcs.
Brand: SPARKFUN
1,23 €

Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around...

ID number: 360/11
Stock YES , 1 pcs.
Brand: SPARKFUN
45,14 €

  Description: Using Sparkfun muscles to control things is the way that most of us are accustomed to doing it. Spark fun push buttons, pull levers, move joysticks… but what if spark fun could take the buttons, levers and joysticks out of ...

ID number: 919/24
Stock NO
Brand: SPARKFUN
54,17 €

  Description: The MyoWare Power Shield is designed to take two standard CR2032 coin cell batteries to power the MyoWare Muscle Sensor. Sparkfun have made this board in a way that the coin cell batteries are connected in parallel for extended ca...

ID number: 917/
Stock NO
Brand: SPARKFUN
5,81 €

VS1000 is a single-chip Ogg Vorbis (license-free audio codec) player. VS1000 contains a high-performance low-power DSP core VS_DSP4, Nand flash interface, full speed USB port, general purpose I/O pins, SPI, UART, as well as a high-quality variable-sa...

ID number: 638/58
Stock NO
Brand: SPARKFUN
7,26 €

  This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).     Document...

ID number: 490/54
Stock NO
Brand: SPARKFUN
1,27 €

Description: Particle’s IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chi...

ID number: 682/
Stock NO
Brand: SPARKFUN
31,90 €

Particle’s IoT (Internet of Things) hardware development kit, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thu...

ID number: 606/
Stock NO
Brand: SPARKFUN
40,20 €

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. Power in supplied to the PicoBuck with a wide range of input voltages (6v to 20v) connected to ...

ID number: 576/58
Stock NO
Brand: SPARKFUN
19,46 €

  Product details   The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be ...

ID number: 1236/58
Stock NO
Brand: SPARKFUN
20,61 €

Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get...

ID number: 1045/54
Stock NO
Brand: SPARKFUN
3,82 €

Description: The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small...

ID number: 1046/54
Stock YES , 3 pcs.
Brand: SPARKFUN
7,73 €

This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Streefland’s USBtiny and Limor Fried&rsquo...

ID number: 552/58
Stock NO
Brand: SPARKFUN
21,90 €

    At SparkFun, they refuse to leave ‘good enough’ alone. That’s why they’re adding to their line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32...

ID number: 1573/11
Stock YES , 5 pcs.
Brand: SPARKFUN
25,78 €

    Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to ...

ID number: 489/54
Brand: SPARKFUN
29,94 €

This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since they come with a space of unpopulated headers. This through-hole header has 40 0.1"-spaced pins and...

ID number: 1796/58
Stock YES , 14 pcs.
Brand: SPARKFUN
1,23 €

    The BLE Nano from RedBearLab is one of the smallest Bluetooth 4.1 Low Energy (BLE) development boards in the market. At each BLE Nano’s core is a Nordic nRF51822, an ARM Cortex-M0 SoC plus BLE capable of running at 16MHz with ultr...

ID number: 1566/33
Stock YES , 2 pcs.
Brand: SPARKFUN
24,10 €

    The BLE Nano from RedBearLab is the smallest Bluetooth 4.1 Low Energy (BLE) development board on the market. With the included MK20 USB in this kit, you’ll be able to deploy firmware to BLE Nano even easier. At each BLE Nano&rsquo...

ID number: 1588/
Stock YES , 1 pcs.
Brand: SPARKFUN
44,23 €

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the resistor you need when you ...

ID number: 605/39
Stock NO
Brand: SPARKFUN
10,26 €

    Description:    RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a ver...

ID number: 1738/
Stock NO
Brand: SPARKFUN
45,14 €

So it turns out that your XBee based device would work even better as a Bluetooth device… that probably means back to the drawing board, right? Well not anymore! Now you can swap in Bluetooth functionality without a major hardware redesign! &n...

ID number: 611/58
Stock NO
Brand: SPARKFUN
32,22 €

  Description: The RockBLOCK Mk2 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky and it works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mi...

ID number: 1031/
Stock NO
Brand: SPARKFUN
419,72 €

  Product Details   Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you out. RoHS and UL approved.   Features:   Right angle solid throu...

ID number: 1223/9
Stock NO
Brand: SPARKFUN
1,23 €

  Product details   This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project.   Documents:   - Dimensional Drawing...

ID number: 1215/9
Stock NO
Brand: SPARKFUN
0,65 €

  Description: This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch, this model is much more robust and capable of handling larger currents and voltages. Y...

ID number: 858/9
Stock YES , 10 pcs.
Brand: SPARKFUN
2,51 €

  Product details   These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.   Documents: &n...

ID number: 1237/58
Stock NO
Brand: SPARKFUN
0,98 €

  Product details   Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can...

ID number: 1238/58
Stock NO
Brand: SPARKFUN
1,23 €

  Product details:   This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each c...

ID number: 1478/15
Stock YES , 2 pcs.
Brand: SPARKFUN
6,72 €

  The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can...

ID number: 488/54
Stock YES , 1 pcs.
Brand: SPARKFUN
25,78 €

This is the Mini Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on...

ID number: 363/2
Stock YES , 4 pcs.
Brand: SPARKFUN
3,82 €

  Description: Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pin...

ID number: 972/58
Stock NO
Brand: SPARKFUN
8,41 €

  Description: The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with i...

ID number: 977/
Stock NO
Brand: SPARKFUN
20,61 €

  Description: The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 spark...

ID number: 969/54
Stock YES , 2 pcs.
Brand: SPARKFUN
14,86 €

  Description: The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DOF) in a single IC! The LSM9DS1 is equipped with a digital...

ID number: 958/54
Stock YES , 1 pcs.
Brand: SPARKFUN
20,61 €

  Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit...

ID number: 962/54
Stock YES , 2 pcs.
Brand: SPARKFUN
21,89 €

  Description: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of...

ID number: 967/54
Stock YES , 2 pcs.
Brand: SPARKFUN
7,11 €

This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow ...

ID number: 438/11
Stock YES , 1 pcs.
Brand: SPARKFUN
32,22 €

The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find ou...

ID number: 635/54
Stock YES , 1 pcs.
Brand: SPARKFUN
29,21 €

  Description: The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system for your car or remote control your media center. With this breakout board spark fun’ve made it eas...

ID number: 971/
Stock NO
Brand: SPARKFUN
63,94 €

  Description: Now mounted on a breakout board, the MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current cons...

ID number: 986/54
Stock YES , 2 pcs.
Brand: SPARKFUN
19,31 €

  Description: The Bluetooth Mate Gold is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacemen...

ID number: 1021/58
Stock NO
Brand: SPARKFUN
54,09 €

  Description: The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for...

ID number: 1036/
Stock NO
Brand: SPARKFUN
36,10 €

  Description: Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets...

ID number: 1023/
Stock NO
Brand: SPARKFUN
41,27 €

  Description: Odometers are extremely useful for cars, they tell you how far you have gone, wouldn’t it be nice if you were able to have a device that does the same for electrical current? The LTC4150 SparkFun Coulomb Counter Breakout is ...

ID number: 989/58
Stock NO
Brand: SPARKFUN
19,31 €

  Description: Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal.   The RTC maint...

ID number: 965/
Stock NO
Brand: SPARKFUN
29,07 €

The SparkFun Differential I2C Breakout is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential signals, two for SCL...

ID number: 1999/58
Stock YES , 2 pcs.
Brand: SPARKFUN
16,03 €

  Description: If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breakout Board all...

ID number: 993/
Stock NO
Brand: SPARKFUN
16,73 €

  Description: This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harvesting piezoelectric energy, but solar energy as well. There is a bridge rectified input for pie...

ID number: 963/54
Stock NO
Brand: SPARKFUN
38,69 €

  Description: This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled mi...

ID number: 1026/58
Stock NO
Brand: SPARKFUN
24,81 €

  Description: The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integ...

ID number: 1027/
Stock YES , 6 pcs.
Brand: SPARKFUN
24,81 €

  Description: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Bro...

ID number: 975/58
Stock NO
Brand: SPARKFUN
29,65 €

  Description: This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package.   All pins of the L298N are broken out to a 15-pin 0.1" pitch header. Two mounting holes are also provid...

ID number: 1009/58
Stock NO
Brand: SPARKFUN
3,82 €

The SparkFun gamer:bit is a fun-filled “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional game system. Designed in a similar form factor to the classic Nintendo NES controller, t...

ID number: 1824/18
Stock NO
Brand: SPARKFUN
14,14 €

  Description: This breakout board gives you access to the little tiny pins on the ribbon connector for the, also tiny, GP-2106 GPS module. All six pins are broken out to standard 0.1" headers. Keep in mind the GP-2106 runs on 1.8V and uses ...

ID number: 1015/58
Stock NO
Brand: SPARKFUN
3,95 €

  Description: This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers. This is a l...

ID number: 1004/
Stock NO
Brand: SPARKFUN
6,71 €

  Product Details   The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. Simply provide 2.7 - 3.3VDC. T...

ID number: 1280/
Stock NO
Brand: SPARKFUN
98,10 €

  Description: Here is a breakout board for the LS20126 GPS receiver. The board allows you to access all the pins on the GPS module through 0.1" spaced holes. Buy a header, solder everything up and you’re ready to go!   The GPS mo...

ID number: 1016/
Stock NO
Brand: SPARKFUN
2,51 €

  Description: This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy bread boar...

ID number: 1017/
Stock NO
Brand: SPARKFUN
4,21 €

This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technolog...

ID number: 558/54
Stock YES , 1 pcs.
Brand: SPARKFUN
48,74 €

  Description: The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for Photon provides you not only with the Photon RedBoard but everything you...

ID number: 1020/
Stock NO
Brand: SPARKFUN
154,94 €

Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. We have designed the remote to be small, very simple, and low-cost. For the majority of the proje...

ID number: 633/15
Stock YES , 2 pcs.
Brand: SPARKFUN
13,36 €

  Description: The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. ...

ID number: 985/58
Stock NO
Brand: SPARKFUN
20,61 €

This is the SparkFun LED Starter Kit, an ultimate assortment of LEDs packed into a single red box! Now, this isn’t a box filled with only one type of LED, oh no. Inside each kit you will find over 70 multi-colored and multi-functional LEDs and ...

ID number: 1554/17
Stock YES , 2 pcs.
Brand: SPARKFUN
45,14 €

  Description: This is a breakout board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different part...

ID number: 976/58
Stock NO
Brand: SPARKFUN
9,69 €

    Description: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate o...

ID number: 1580/42
Stock NO
Brand: SPARKFUN
11,57 €

    The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the res...

ID number: 1570/54
Stock YES , 4 pcs.
Brand: SPARKFUN
15,79 €

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s nest of wires. The Load Se...

ID number: 1797/54
Stock YES , 4 pcs.
Brand: SPARKFUN
2,51 €

If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same...

ID number: 434/58
Stock NO
Brand: SPARKFUN
3,82 €

This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphone’s input can fit flush against the enclosure of your project. Plus you...

ID number: 431/58
Stock NO
Brand: SPARKFUN
14,14 €

  Robots are fun, and the micro:bit is the perfect controller for learning how to build and program robots! Combining the micro:bit with the SparkFun moto:bit carrier board creates a flexible, low-cost robotics platform for robot enthusiasts you...

ID number: 1828/18
Stock YES , 1 pcs.
Brand: SPARKFUN
84,12 €

The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. T...

ID number: 579/54
Stock YES , 3 pcs.
Brand: SPARKFUN
21,41 €

The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the...

ID number: 1825/18
Stock NO
Brand: SPARKFUN
7,98 €

Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects.   Communication with microSD cards is achieved over ...

ID number: 655/11
Stock YES , 1 pcs.