The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
Galvanic isolated Serial Port Converter
PRODUCT TYPE | Galvanic isolated TTL To RS485 converter | |
---|---|---|
POWER SUPPLY INTERFACE | Power supply | 3.3V ~ 5V |
Protection | over-voltage, reverse-proof | |
DEVICE PORT | TTL/RS485 standard compatible | |
TTL | Connector | screw terminal |
Transmission distance | about 10m | |
Transmission mode | point-to-point | |
RS485 | Connector | screw terminal |
Protection | 600W lightningproof and surge-suppress, 15KV ESD protection | |
Terminal resistor | 120R, enabled/disabled via switch | |
Transmission Distance | About 1.2km | |
Transmission Mode | point-to-multipoint (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
APPEARANCE | Case | Rail-mount ABS case, suitable for 35mm DIN rail |
Dimensions | 91.6 × 58.7 × 23.3mm |
Converting The TTL Signal Into Balanced Differential RS485 Signal
For Interface Converting, Expanding Nodes And Long-Distance Communication
Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely
Onboard power and signal isolation, provide stable isolated voltage, high reliability and strong anti-interference. Onboard Lightningproof Diodes and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage protection, improves shock resistance
TOP SIDE SCREW TERMINAL | BOTTOM SIDE SCREW TERMINAL | ||
---|---|---|---|
VCC | Power Input DC 3.3V~5V power supply |
DIP SWITCH | 120R enable switch |
GND | Ground | SGND | RS485 signal ground |
TXD | TTL transmit data pin | A+ | RS485 differential signal positive |
RXD | TTL receive data pin | B- | RS485 differential signal negative |
TTL convert to RS485, point to point, half-duplex communication, suitable for interface conversion
TTL convert to RS485, point-to-multipoint, half-duplex communication, suitable for expanding nodes
Two groups TTL To RS485 conversion, point-to-point, half-duplex communication, suitable for extending the communication distance of TTL
The TTL To RS485 (B) can be widely used for point-to-point, point-to-multipoint, long distance cascaded communication network between two hosts, or between host and MCU/Peripheral. It also can be used in the application scenarios that require TTL To RS485 conversion such as Industrial Automation and IoT.