The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
Embedded GC9A01 Driver, Using SPI Bus
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
OPERATING VOLTAGE | 3.3V / 5V | RESOLUTION | 240 × 240 pixels |
---|---|---|---|
COMMUNICATION INTERFACE | 4-wire SPI | DISPLAY SIZE | Φ32.4mm |
DISPLAY PANEL | IPS | PIXEL SIZE | 0.135 × 0.135mm |
DRIVER | GC9A01 | DIMENSIONS | 40.4 × 37.5mm Φ37.5mm |
Supports Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
VCC | Power (3.3V / 5V input) |
---|---|
GND | Ground |
DIN | SPI data input |
CLK | SPI clock input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
BL | Backlight |
Connecting With Raspberry Pi
Connecting With Arduino Board