The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
Embedded ST7789V2 Driver Chip, Using SPI Interface
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
OPERATING VOLTAGE | 3.3V / 5V | RESOLUTION | 170 × 320 pixels |
---|---|---|---|
COMMUNICATION INTERFACE | 4-wire SPI | DISPLAY SIZE | 22.70 × 42.72 mm |
DISPLAY PANEL | IPS | PIXEL SIZE | 0.1335 × 0.1335 mm |
DRIVER | ST7789V2 | MODULE SIZE | 27.3 × 51.2mm |
Compatible With 3.3V / 5V Power Input
For Use With Controller Boards Like Raspberry Pi / Arduino / STM32
BL | Backlight |
---|---|
RST | Reset, low active |
DC | Data/Command selection (high for data, low for command) |
CS | Chip selection, low active |
CLK | SPI clock input |
DIN | SPI data input |
GND | Ground |
VCC | Power (3.3V / 5V input) |
Connecting With Raspberry Pi
Connecting With Arduino Board
Connecting With STM32