The item is currently not in stock. Please log in below and we'll send you a message as soon as the item is in stock. You will be notified only for this item.
Send us an inquiry for your desired item and we will contact you.
Send us an inquiry for your desired item and we will contact you.
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.
Tehnical specifications
Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM MCU |
Board Power Supply(USB/VIN) | 5V |
Supported Battery | Li-Po single cell, 3.7V, 700mAh minimum |
DC Current for 3.3V Pin | 600mA |
DC Current for 5V Pin | 600mA |
Circuit Operating Voltage | 3.3V |
Digital I/O Pins | 22 |
PWM Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) |
UART | 1 |
SPI | 1 |
I2C | 1 |
Analog Input Pins | 7 (ADC 8/10/12 bit) |
Analog Output Pins | 1 (DAC 10 bit) |
External Interrupts | 10 (0, 1, 4, 5, 6, 7, 8, 9, 16 / A1, 17 / A2) |
DC Current per I/O Pin | 7 mA |
Flash Memory | 256 KB |
Flash Memory for Bootloader | 8 KB |
SRAM | 32 KB |
EEPROM | no |
Clock Speed | 32.768 kHz (RTC), 48 MHz |
LED_BUILTIN | 32 |
Full-Speed USB Device and embedded Host |
More information