Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:

Search
English
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Log in Register
NEW PRODUCTS
SALE
TOP SELLERS
Cost of delivery
Choose country
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Macedonia, the former Yugoslav Republic of
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Post delivery 5.00 EUR
 
Information
Terms and conditions
Ask us
Galago electronics
Galago d.o.o.
Gačnikova pot 2
2390 Ravne na Koroškem
Slovenija
Email: info@galago.si
Phone: 00386 (0)8 205 08 77
Phone: 00386 (0)40 559 432
Facebook

2.8 TFT LCD WITH TOUCHSCREEN BREAKOUT BOARD W-MICROSD SOCKET, ADAFRUIT 1770

  ID number: 384/38
Brand:ADAFRUIT
Stock:   YES, 5 pcs.
Price:37,69 €
lcd-s ADAFRUIT 2.8 TFT LCD with Touchscreen Breakout Board w-MicroSD Socket, Adafruit 1770
lcd-s ADAFRUIT 2.8 TFT LCD with Touchscreen Breakout Board w-MicroSD Socket, Adafruit 1770
lcd-s ADAFRUIT 2.8 TFT LCD with Touchscreen Breakout Board w-MicroSD Socket, Adafruit 1770
lcd-s ADAFRUIT 2.8 TFT LCD with Touchscreen Breakout Board w-MicroSD Socket, Adafruit 1770
lcd-s ADAFRUIT 2.8 TFT LCD with Touchscreen Breakout Board w-MicroSD Socket, Adafruit 1770
 

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

 

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog).

 

It is an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you're going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (microSD card not included, but any will work)

 

For 8-bit interface fans Adafruit written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and more. For SPI users, Adafruit have a library as well, its separate from the 8-bit library since both versions are heavily optimized. Adafruit also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it.

 

Follow Adafruit step by step guide for wiring, code and drawing. You'll be running in 15 minutes

 

Specifications:

- 2.8" diagonal LCD TFT display

- 240x320 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster.

- ILI9341 (datasheet) controller with built in video RAM buffer

- 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) - not including the touch screen.

- 5V compatible! Use with 3.3V or 5V logic such as an Arduino

- Onboard 3.3V @ 150mA LDO regulator

- 4 white LED backlight, transistor connected so you can PWM dim the backlight

- 1x20 headers for easy breadboarding

- 4-wire resistive touchscreen

- 40g

 

Links:

Adafruit totorial