Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Search
English
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Log in Register
NEW PRODUCTS
SALE
TOP SELLERS
Cost of delivery
Choose country
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Post delivery 5.00 EUR
 
Information
Terms and conditions
Ask us
Galago electronics
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
Email: info@galago.si
Phone: 00386 (0)2 620 08 14
Phone: 00386 (0)40 559 432
Facebook

UPS PICOTOP-END WITH BATTERY 450, PIMODULES HV3.0B HAT

  ID number: 1812
Brand:PIMODULES
Stock:   YES
Price:38,98 €
razvojni dodatki PIMODULES UPS PIcoTop-End with Battery 450, Pimodules HV3.0B HAT
razvojni dodatki PIMODULES UPS PIcoTop-End with Battery 450, Pimodules HV3.0B HAT
 

UPS PIco HV3.0B HAT Top-End with Battery 450

 

 

product description

 

- Intelligent Mobile Power Bank and Uninterruptible Power Supply

 

- with RTC, Peripherals and I2C control Interface

 

- Designed Especially for the Raspberry Pi® 3

 

 

compatible with

 

- Raspberry Pi®: Pi 2, Pi Zero,  Pi A+, Pi B+

 

- 3A total current Supply with GPIO Powering Input and Battery Back-Up

 

- Hardware RTCC, Bi Stable Relay (optional), 3 x 12 bit Fast prescaled A/D, Intelligent ON/OFF switch

 

 

 

Ordered Item contains:

 

- UPS PIco HV3.0B 450 HAT Top-End PCB with all described below long list of features

- LiPO Battery 450 mAh 15C

- Not Soldered 2 x 8 Pins headers for all specified below I/Os

- Not Soldered Gold Plated Reset Pin

- Not Soldered Electromagnetic Sounder

- Not Soldered ON/OFF slide switch

- Mounting Spacers, screws, nuts need to mount on the Raspberry Pi® microcomputer

 

 

Ordered Item does not contain and should be ordered separately if needed for specific application:

 

- Infrared Receiver

- High Capacity Batteries (1500 mAh, 4000 mAh, 8000 mAh)

- Bi-Stable (Zero Power) Latching Relay with appropriate TB

- PIco single LP/LF 18650 Battery Holder

- PIco double Li-Ion 18650 Battery Holder

- UPS PIco HV3.0A Terminals Blocks PCB

- PIco FAN Kit 3.0

 

 

System Overview

 

The UPS PIco HV3.0B HAT Top-End with Battery 450 is an advanced Intelligent Mobile Power Bank and Uninterruptible Power Supply for the Raspberry Pi® A+/B+/2/3 and ZERO/W, that adds a wealth of innovative power powering/back-up functionality and development features to the innovative microcomputer! The UPS PIco HV3.0B HAT Top-End with Battery 450 will automatically shut-down your Raspberry Pi® if there is a power failure, and can be set to automatically monitor and reboot your Raspberry Pi® once power has been restored! It is equipped also with an Intelligent External Accessed (with Files Safe Shutdown) Power Switch that allows to safety System Switch ON/OFF whenever you like, without worrying about files corruption

 

The UPS PIco HV3.0B HAT Top-End with Battery 450 features a 5V 3A total current output on battery, designed for use on the latest Raspberry Pi 3!

 

UPS PIco HV3.0B HAT Top-End with Battery 450 offers now 3 User Programmable Keys, 3 User programable LEDs, support for multiple different chemistry of high capacity batteries, 2 x 3 pins bi-stable relay (Zero Power) configured as DPDT or SPDT, as also 3 x A/D 12-bit converters with pre-adjustable readings to 5V, 10V, 20V and 30V conversion (when used with Terminal Blocks PCB or separate external resistor). Now, with number embedded sensors (inbound current, outbound current, temperature, voltages), true 5V 1-wire interface, optional RS232 interface and many, many additional functionalities!!

 

The UPS PIco HV3.0B HAT Top-End is equipped with a 450mAh 15C LiPO battery (able to supply 6.5A) specially designed to enable safe shutdown during a power cut. Additionally, this can be easily upgraded to the extended 4000mAh or 8000mAh versions, which enables prolonged use of a Raspberry Pi for up to 16 hours without a power supply connected!

 

Now, with new add-on board (PIco LP/LF Li-Ion 18650 Battery Holder) you can use all types of the Li-Ion 18650 batteries from electronic cigarettes approaching total capacity of 7200 mAh, as also 18650 LiPO and LiPo4Fe (called 123).

 

The UPS PIco HV3.0B HAT Top-End with Battery 450 is powered and the battery pack intelligently charged via the GPIO pins on the Raspberry Pi®, therefore no additional cabling or power supply is required. Due to that UPS PIco HV3.0B HAT Stack with Battery 450 requires no external powering and fits within the footprint of the Raspberry Pi®, it is compatible with most cases, including official Raspberry Pi case with closed lid (Top-End Version)

 

The new PCB is 2 oz copper 4 layers, especially designed for powering systems offering Multilayer Copper Thermal Pipes for increased System Thermal Response and better passive cooling!!

 

UPS PIco HV3.0B 450 HAT Top-End Core Features

 

 

The list of features of the UPS PIco HV3.0B HAT Top-End with Battery 450 are as follows:

 

 

General

 

- Raspberry Pi B+ HAT Compliant (HAT dimensions and HAT EEPROM)

- Plug and Play – Ultra Simple Semi-Automatic Installation via GitHub

- Standard Interrupts driven interaction with Raspberry Pi® based on Daemons using GPIO27 (Pin13) & GPIO22 (Pin15)

- (Optional) GPIO free (all GPIOs are available for user application) interaction with Raspberry Pi® is based on current consumptions and I2C activity

- Simple status email broadcasting application based on Daemons when Powering Status Changed

- Enhanced System Monitoring and Programming API

- Labeled J8 Raspberry Pi® GPIO Pins for Easy Plug & Play of experimental cables

- Standard THT 40 Pin connector (not soldered)

- (optional) Remote bootloader for Live Firmware Update (HV3.0B only)

- Local bootloader (standard) for Live Firmware Update

 

 

Powering Options

 

- Intelligent Uninterruptible Power Supply (UPS)

- Mobile Battery Power Bank (starts-up without cable power cycling)

- File Safe Shutdown and Start-up Functionality on a Single Button

- Single slide ON/OFF switch for battery powered (mobile) applications running without power cycling (with File Safe Shutdown functionality when OFF)

- Possibility to solder external ON/OFF switch (Ready Soldering PADs)

- Integrated LiPO Battery 450 mAh 15C (10-15 Minutes of Power Back-Up)

- 5V 2.6A Power Backup (Peak Output 5V 3A)

- No Additional External Power Input Required. System is monitoring power status over 5V GPIOs, therefore is compatible with 99.9% of all existing cases

- Additional programmable 5V power source with battery backup, available for user applications also when Raspberry Pi is OFF (5V@750mA) protected with PPTC FUSE and reverse current flow diode, controlled by User and RTC Scheduler.

- User and RTC Scheduler controlled 2A@3.3V protected output (sourced from independent and dedicated LDO)

 

 

Supported Batteries Types and Capacities

 

- Support for LiPO, LiFePO4 and Li-Ion Chemistry Batteries on the same PCB (with high current cable connection) with dedicated plastic base

- Support for Li-Ion 18650 low cost batteries (from Electronic Cigarettes) with dedicated mounting base PCB screwed on top

- Support for LiPO 18650 batteries with dedicated mounting base PCB screwed on top

- Support for LiFePO4 18650 batteries with dedicated mounting base PCB screwed on top

- Intelligent Automatic Battery Charger

- Available Standard Batteries Capacities are:

LiPO 4000 mAh

LiPO 8000 mAh

LiPO 1500 mAh

LiFePO4 4000 mAh

LiFePO4 8000 mAh

Li-Ion from 1200 mAh up to 7200 mAh

Any user selected 16850 battery capacity

 

 

Embedded Peripherals and Interfaces

 

- 3 User Programmable LEDs for user own application with additional connectivity to external User LEDs (HV3.0B only)

- 3 User Programmable Buttons for their own application with additional cable connectivity to external User Buttons (HV3.0B only)

- System File Safe Shutdown/Start-up button with additional cable connectivity to external button (HV3.0B only)

- Single slide ON/OFF switch for battery powered applications with additional cable connectivity to external User Switch (OFF is always combined with File Save Shutdown capability) (HV3.0B only)

- (Optional) Bi Stable Relay (Latching - Zero Power) assembled on two different mounting positions:

with two galvanic isolated independent contacts DPDT 1A/30V

with single high current contacts SPDT 2A/30V (HV3.0B only)

- Integrated True 5V ESD protected 1-wire interface (with voltage converter to 3.3V) connected directly to the GPIO4 (HV3.0B only)

- Integrated ESD-Protected 3 x 12-bit A/D converters with voltage conversion embedded calculators and raw data option (implemented in firmware extensive Lowpass and Olympic Score filtering):

0V-5.2V

0V-10V

0V-20V

0V-30V

- Infra-Red Receiver Sensor Interface (IR Not Included) directly connected to the GPIO18

- Programmable Integrated PWM Sounder (programmable by user API or Automatic), able to play music

- Integrated Hardware Real Time Clock (RTC) with Battery Back-Up

- PWM fan control with dedicated Temperature sensor touching the Raspberry Pi ® PCB, based on Raspberry Pi or Embedded Temperature Sensor (Fan need to be ordered separately)

- On Battery Powered System Available Running Time (calculated on battery capacity, Battery Level and System Current Consumption)

- (optional) second RS232 port (5V tolerant, or 12V via Terminals Block PCB)

 

 

Embedded Sensors

 

- Outbound current measure sensor when Battery powered

- Inbound current measure sensor when Cable powered

- NTC based onboard temperature sensor

- (Optional) TO92 Temperature sensor

- Battery Level Voltage

- Raspberry Pi GPIO 5V level

 

 

User/Programmer Interface

 

- I2C PICo API Interface for Control and Monitoring, with over 50 programming registers

- Support for 3 different users selectable I2C addresses sets:

DEFAULT: 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F

NO_RTC: 0x69, 0x6B

ALTERNATE: 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F

 

 

System Schedulers

 

- Basic Time Scheduler

- Event Triggered RTC Based System Actions Scheduler (ETR SAS)

       

System can wakeup and sleep on external or internal events like:

 

- temperature,

- 3 x A/D levels,

- voltage,

- RS232 data;

       

as also can trigger Actions like: Relay, Auxiliary Voltage ON/OFF, RS232 data with or without involvement of the Raspberry Pi®. Always based on internal Hardware RTC

 

Case Compatibility

 

- No Additional External Power Input Required. System is monitoring power status over 5V GPIOs, therefore is compatible with 99.9% of all existing cases

- Fits Inside Most Existing Cases as no extra cabling is needed

- Fits inside to the Official Raspberry Pi Case with closed lid (version Top-End only)

 

 

System Monitoring

 

- Status Monitoring – Powering Mode, Inbound current, Outbound current, Powering Voltage, UPS Battery Voltage, Current and Temperature

- Events Pi Log feature

- System LEDs – UPS, BAT, CHG, INF, FAN (optionally selected can be mapped to User LEDs)

- System Healthy, that informs user remotely if Raspberry Pi and UPS Pico HV3.0 are running properly and system is power protected (based on various internal system triggers)

 

 

User Applications Security

 

- (optional) 2-way XTEA Based Encryption Engine for User Intellectual Properties protection

 

 

System Protection

 

- Direct Raspberry Pi® Hardware Reset Button via Spring Test Pin (pogo pin)

- Programmable Watch-Dog Hardware feature (Still Alive Timer)

- PPTC 2.6A fuse

- ZVD circuit on 5V GPIO connections

- Microcontroller watch-dog

- Over Temperature protection

- Over Current protection

 

 

System Design

 

- Designed and Analyzed with one of the most advanced CAD/CAM Tools - Mentor Graphics PADS

- Design Based on Microchip 16-bit 16MIPS micro controller

- Industrial Originated

 

PCB Construction

 

- 2 oz copper PCB manufactured for proper high current supply

- 6mils track/6mils gap technology 4 layers PCB

- PCB Surface Finishing - Immersion Gold

- Multilayer Copper Thermal Pipes for increased System Thermal Response and better passive cooling

 

 

Designed and Manufactured in Europe

 

3D PDF (Please download first and then open with Adobe Acrobat)

 

Revised Prospectus and Technical Specifications (Can be opened directly with Web Browser and Adobe Acrobat)

 

Purchase combination

  • Official Raspberry Pi 3 Model B, 2 B, B+ Development Board Case, Red, White, TZT 241 AAA-01
    9,70 €
  • +
  • Raspberry Pi Model 3 B SBC, Raspberry Pi 3 Model B
    40,11 €
  • +
  • UPS PIcoTop-End with Battery 450, Pimodules HV3.0B HAT
    38,98 €
=
Save 2.78 €
86,01 €
TO CART