Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:

Search
English
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Log in Register
NEW PRODUCTS
SALE
TOP SELLERS
Cost of delivery
Choose country
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Macedonia, the former Yugoslav Republic of
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Post delivery 5.00 EUR
 
Information
Terms and conditions
Ask us
Galago electronics
Galago d.o.o.
Gačnikova pot 2
2390 Ravne na Koroškem
Slovenija
Email: info@galago.si
Phone: 00386 (0)8 205 08 77
Phone: 00386 (0)40 559 432
Facebook

PICOBUCK LED DRIVER, SPARKFUN, COM-13705

  ID number: 1236/
Brand:SPARKFUN
Stock:   YES
Price:20,07 €
LEDs SPARKFUN PicoBuck LED Driver, Sparkfun, COM-13705
LEDs SPARKFUN PicoBuck LED Driver, Sparkfun, COM-13705
LEDs SPARKFUN PicoBuck LED Driver, Sparkfun, COM-13705
LEDs SPARKFUN PicoBuck LED Driver, Sparkfun, COM-13705
 

 

Product details

 

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. Version 12 of the board adds a solderable jumper that can be closed to increase the maximum current to 660mA. The new voltage regulator also increased the voltage rating on the various components on the board, allowing it to be used up to the full 36V rating of the AL8805 part.

 

Three signal inputs are provided for dimming control. You can use the PWM signal from an Arduino or your favorite microcontroller to dim each channel individually, or you can tie them all to the same PWM for simultaneous dimming. Dimming can be done by an analog voltage (20%-100% of max current by varying voltage from .5V-2.5V) or by PWM (so long as PWM minimum voltage is less than .4V and maximum voltage is more than 2.4V) for a full 0-100% range. A small jumper is provided for each channel to allow you to increase the drive strength from 330mA to 660mA. Two mounting holes for 4-40 or M3 screws are provided on either side of the board. They are perforated so they can be easily snapped off with a pair of pliers, if a smaller footprint is desired.

 

Documents:

 

- Schematic

- Eagle Files

- Datasheet (AL8805W5)

- Hookup Guide

- Protofusion Page

- GitHub